Cleaning the cracks from debris and dirt
Open the cover (manhole) of the pit, clean all the edges of the frame in order to remove dust, scale and dry the supporting surface very well. Similarly, clean the entire edge of the manhole cover.
TRAP WITH POINT SUPPORT
VibroBlock Plus is ideal for restoring the coplanarity of the support points of square and rectangular traps.
MANHOLE COVERS WITH LINEAR SUPPORT
VibroBlock plus is ideal for restoring the coplanarity of the supporting edges and the relative odour resistance of circular, square and rectangular manhole covers.
1
OPENING POINT AND CLEANING
Cleaning the cracks from debris and dirt
Open the cover (manhole) of the pit, clean all the edges of the frame in order to remove dust, scale and dry the supporting surface very well. Similarly, clean the entire edge of the manhole cover.
2
MANHOLE COVER GREASING
Grease the edges
Grease the manhole cover, the sides and the points of contact with the frame using an environmentally friendly lubricating grease or a spray can of running grease supplied with the purchase of 11 cartridges.
3
RESIN COAT
Injection of bi-component resin
Unscrew the cap, screw in the mixing nozzle and insert the cartridge into the dispensing gun.Apply the resin discarding the initial part until it turns into a uniform grey colour.
Spread the resin along the horizontal edge of the frame.
4
CLOSING
Repositioning the manhole cover
Replace the previously greased cover. Do not beat and do not stress in any way during the entire curing time.
Wait 1 hour at summer temperature and at least 2 hours at winter temperature before opening the vehicle passage.
In addition to all types of manhole covers, traps and grilles, VibroBlock Plus is also used for Telecom-type compartment hatches.
VibroBlock Plus is also used as a resin for bonding between different materials and thus with different thermal deformations.
For example, switchboards made of steel or plastic on concrete foundations.
VibroBlock Plus is also used as a resin for anchoring signal lights, radio antennas, signal signs and small,
elevated structures at airports or at industrial and/or civil premises.