SIGILRAPID PLUS

High elastic capacity:

SigilRapid plus is a professional polymer-based sealant that reacts with air humidity. The peculiarity of this sealant is that it is a-thermic, i.e. it maintains the same elasticity both at low and high temperatures. SigilRapid plus has an elastic elongation capacity of more than 60% provided that it maintains an ideal form coefficient equal to 1.5 (1 cm wide by 1.5 cm deep).

SIGILRAPID PLUS

Excellent adhesion:

SigilRapid plus adheres perfectly to porous materials, even of a different nature, as long as they are clean and free of dust, oils or solvents.
It must be extruded under pressure so as to push it onto the walls of the profile on which it must adhere.
In addition to the application by extrusion with the appropriate gun, it can be applied with the aid of a spatula and/or coated.

SIGILRAPID PLUS

Thermal resistance:

SigilRapid plus can withstand low temperatures of down to -40°C and high temperatures of up to +120°C when polymerised.
The ideal temperatures for laying range between 0°C and +30°C.
The product must be stored in a dry and ventilated place, protected from ultraviolet rays and at a temperature not exceeding 30°C.

SIGILRAPID PLUS

Chemical resistance:

SigilRapid plus is resistant to corrosive mineral and vegetable oils, gasoline, acids and sewage once polymerised.
SigilRapid Plus is also available with airport certification to ensure resistance to aviation fuels.
SigilRapid Plus is dark grey in colour and is available in two formulations, one dense for joints and sealings and the other liquid and self-levelling.

SIGILRAPID PLUS

Respects the environment:

SigilRapid plus reacts with the humidity of the air, cross-linking rapidly on the surface to polymerise in depth at the rate of 1mm per hour. Once cured, it is inert and can be recycled and disposed of as non-hazardous waste.