LASTING AND CONSISTENT BENEFITS OVER TIME
|
TECHNICAL DATA SHEET
|
 |
||
|---|---|---|---|
|
Maltarapid plus is a product that complies with standard EN 124-1:2015, which came into force in April 2017. Appendix F - Recommendations for the installation of manhole covers. |
Tests in accordance with the applicable laws and regulations |
||
| U.M. | VALUE | ||
|
Maximum particle size of the aggregates
|
mm | 4 | |
| Fresh mortar density | kg/m³ | 2.300/2.600 | |
| Volumetric increase in 1 d | + 0,5% | ||
| Working time | min | 15 | |
|
Compressive strength |
after 30 minutes | kN | > 1,5 |
| after 1 hour | > 8,0 | ||
| after 24 hours | > 35,0 | ||
| after 28 days | > 50,0 | ||
|
Characteristic compressive strength at end of hardening process
|
N/mm² | > 50,0 | |
LASTING AND CONSISTENT BENEFITS OVER TIME
RESISTANCE TO SALT AND FROST
RESISTANT TO ACIDS AND HYDROCARBONS
|
|---|
Supply of black thixotropic, quick-hardening, shrinkage-compensated mortar reinforced with polyethylene fibres in accordance with standard EN 124-1-2015 Appendix F. Supplied in 25kg paper bags, ready to use on site after mixing with 12% water, with such plasticity as not to require formwork up to 10/15 cm thick. Suitable for fixing road signs, street furniture, cords, manhole covers and renovating wells, small foundations and concrete structures. The product can also be used at low temperatures. Compressive strength, minimum of 8 N/mm2 at 1 hour, 12 N/mm2 at 2 hours and 35 N/mm2 at 24 hours, resistant to frost and thaw, aggressive agents and hydrocarbons.
Minimum storage of six months.
|
PURCHASE VIA ME-PA
|
||
|---|---|---|
|
item code: MALTAR40 (region)
|
pallet composed of 40 25kg bags - 1 ton
|
|
