download technical pdf sheet 

SPECIFICATIONS

ACTIVATES IMMEDIATELY BY COMPRESSION

DOESN'T STICK TO YOUR TYRES

DOES NOT FEAR WATER AND SALT

NOT DIRTY, ODOURLESS

PERMANENT

IN-SITU RESISTANT

KaltAsphalt Plus can be used without distinction in any situation of deterioration of the road surface. Its effectiveness is guaranteed for a minimum of 12 months if used on a simple spider web, 24 months when used to fill footprints due to subsidence of the road surface, and up to 36 months when used in the classic surrounded hole.

HIGH WORKABILITY

SEPARATION

KaltAsphalt Plus is currently the only cold-structured conglomerate, made solely from binder in solid form modified with SBS. SBS is a thermoplastic elastomer that provides an exceptional elastic performance, so as to adapt to the deformations of the road surface.

RESISTANT TO HIGH TEMPERATURES AND FROST

KaltAsphalt Plus, because it does not contain any trace of traditional bituminous binders and/or solvents, maintains its characteristics of great workability even at very low temperatures (-30°C). At the same time, when used in the presence of intense cold, thanks to its great elasticity, it will not cause problems of structural fractures.

Eco-friendly

 


ADVANTAGES

VERSATILITY

Insensitive to temperatures as low as -30°C. Resistant to high temperatures up to 60°C. It can also be laid in the rain or snow, without the need for a primer or manual coating.

It preserves its characteristics for over 36 months and is always ready to use.

SAVINGS

Thanks to its durability and resistance, the cost of completely rebuilding the road surface can be postponed over time.

SAFETY

Able to close the hole, depression or crack in a durable and definitive way. It is produced with first class aggregates, which allow it to pass the ASTM E303 test, so as to ensure the correct roughness and adhesion to all vehicles.

TECHNICAL SUPPORT

Free technical support from our technologist, both by phone and on site on request, to answer all your questions, as well as to organise a practical demonstration of the installation procedure.

 

 


USE

KaltAsphalt Plus can be installed in a hole surrounded by water or in the presence of snow. The thickness should be increased appropriately to compensate for the normal decrease due to compaction. It is also possible to refill with small thicknesses. Since the activation takes place by compression, vehicle traffic activates its force. Laboratory tests have proven the durability of KaltAsphalt Plus in a confined hole for more than 36 months.

HOLES EVEN WITH WATER

KaltAsphalt Plus is also ideal for compensating wheel-ruts caused by heavy traffic. The high cohesion of the binder ensures resistance even on thin side edges. The elasticity of KaltAsphalt Plus allows it to absorb further deformations of the road surface, without generating detachments. Laboratory tests have proven the service life of KaltAsphalt Plus, in the Netherlands, to go beyond 24 months.

WHEEL-RUT

KaltAsphalt Plus solves even the most critical situations when we have branched spider webs, which are synonymous with total subsidence of the substrate. The elasticity of KaltAsphalt Plus allows it to absorb further deformations of the road surface over a long period of time. It also solves pumping phenomena. Laboratory tests have proven the durability of KaltAsphalt Plus on cobwebs for more than 12 months.

SPIDER WEB

KaltAsphalt Plus restores the coplanarity around the manhole frames in cases where there have been detachments of the road surface.  In the renovation of manhole covers and traps carried out with our MaltaRapid Plus, KaltAsphalt Plus is perfect for finishing the crowning. KaltAsphalt Plus also adheres to the surface of stabilised mortars and aggregates.

MAN HOLE EDGE


SERVICES

FREE DEMONSTRATION

In order to highlight the characteristics and peculiarities of KaltAsphalt Plus, which is completely different from traditional plasticisers, we carry out practical installation demonstrations. Contact us to organise a demonstration at your premises.

TRANSPORT, UNLOADING AND POSITIONING

From 1 to 8 pallets, the transport includes unloading by hydraulic platform and positioning in the warehouse by pallet truck.

TABLE OF WORK IN PROGRESS AND HIGH VISIBILITY JACKET

To carry out application of KaltAsphalt Plus safely, we can provide a self-supporting table to signal work in progress and high-visibility yellow jackets.

WARRANTY
100% SATISFIED

Thanks to the direct relationship between the manufacturer and the end user, we provide a 100% satisfied policy for a minimum of 12 months, with any replacement free of charge.

 

 


TESTED AND APPRECIATED BY....

Province of Vicenza

Province of Monza Brianza

Province of Asti

Autonomus province of Trento

Commune of Milano

 

Cookies help us provide you with our services. By using our services, you accept our methods of using cookies. Learn more. Close